Moku:DataLogger lets you log voltage data directly to an SD card for long-term measurements at rates of up to 100 kHz. The duration is limited only by the capacity of the SD card. You can also fetch previous log files from the device and upload them to Dropbox or iCloud, or send them as an email attachment.
+ How long can I record for?
The Moku:Datalogger is limited only by storage. The Moku:Lab has 500MB of internal storage and can also log to an SD card of any size. Note though that most SD cards use the FAT32 filesystem, which is limited to a maximum file size of 4GB.
Recording a single channel at minimum rate to a binary file, this gives you approximately 4 months of recording to internal storage, up to 2.5 years to an SD card.
+ How can I read data from .li files?
The LI File Converter can be used to convert binary data from a .li file into plain text data in CSV (comma-separated values) format, or to a MATLAB .mat file. You can download it here: https://www.liquidinstruments.com/utilities/.
+ How can I import a CSV file from Moku:Datalogger into MATLAB?
If you only need the data itself, simply type
load yourfile.csv at the MATLAB command prompt. CSV files generated by Moku:DataLlgger also contain a text header with information about when the data was recorded, the instrument settings, and what each column in the data represents. If you want to import this metadata as well, use the command
moku = importdata('yourfile.csv').