Discover Moku:Lab’s

200 MHz
Lock-in Amplifier

Wirelessly configure and monitor your Lock-in's performance, all from an intuitive iPad interface, or with Python and MATLAB (LabVIEW coming soon).

Ask Us Anything
ProductTop.jpg

Discover Moku:Lab’s

200 MHz
Lock-in Amplifier

Wirelessly configure and monitor your Lock-in's performance, all from an intuitive iPad interface, or with Python and MATLAB (LabVIEW coming soon).

ProductTop.jpg
Ask Us Anything

Bandwidth

200 MHz

Dual-phase

XY / RØ

Input voltage noise

30 nV/√Hz

Integrated Oscilloscope

500 MSa/s

Lock-in Amplifier overview

Moku:Lab’s digital Lock-In Amplifier supports dual-phase demodulation (XY/RØ) from DC to 200 MHz with more than 80 dB of dynamic reserve. It also features an integrated 2-channel oscilloscope and data logger, enabling you to observe signals at up to 500 MSa/s and log data at up to 1 MSa/s.

Features


  • Measure signals obscured by noise with more than 80 dB dynamic reserve
  • Block diagram view of the digital signal processing chain
  • Built-in probe points for signal monitoring and data logging
  • Internal or external demodulation modes including a PLL (phase-locked loop)
  • Dual-phase demodulation
  • Toggle between rectangular (X/Y mode) or polar coordinates (R/Theta mode)
  • Built-in PID Controller

Specifications


  • Demodulate with frequencies ranging from 1 mHz to 200 MHz with 3.55 μHz resolution
  • Phase shift precision of 0.001°
  • Input gain: -20 dB / 0 dB / + 24 dB / + 48 dB
  • 50 Ω / 1 MΩ input impedance
  • Adjustable time constant from 40 ns to 0.6 s
  • 6 or 12 dB/octave filter roll-off
  • Output gain range: ± 80 dB
  • LO output up to 200 MHz with variable amplitude
  • Ultra-fast data acquisition: snapshot mode up to 500 MS/s, continuous mode up to 1 MS/s
Download User Manual

Lock-in Amplifier overview

Moku:Lab’s digital Lock-In Amplifier supports dual-phase demodulation (XY/RØ) from DC to 200 MHz with more than 80 dB of dynamic reserve. It also features an integrated 2-channel oscilloscope and data logger, enabling you to observe signals at up to 500 MSa/s and log data at up to 1 MSa/s.

Features


  • Measure signals obscured by noise with more than 80 dB dynamic reserve
  • Block diagram view of the digital signal processing chain
  • Built-in probe points for signal monitoring and data logging
  • Internal or external demodulation modes including a PLL (phase-locked loop)
  • Dual-phase demodulation
  • Toggle between rectangular (X/Y mode) or polar coordinates (R/Theta mode)
  • Built-in PID Controller

Specifications


  • Demodulate with frequencies ranging from 1 mHz to 200 MHz with 3.55 μHz resolution
  • Phase shift precision of 0.001°
  • Input gain: -20 dB / 0 dB / + 24 dB / + 48 dB
  • 50 Ω / 1 MΩ input impedance
  • Adjustable time constant from 40 ns to 0.6 s
  • 6 or 12 dB/octave filter roll-off
  • Output gain range: ± 80 dB
  • LO output up to 200 MHz with variable amplitude
  • Ultra-fast data acquisition: snapshot mode up to 500 MS/s, continuous mode up to 1 MS/s
Download User Manual

Flexible inputs

The Lock-In Amplifier’s signal and reference inputs can be configured for AC or DC coupling and 50 Ω or 1 MΩ input impedance. The signal input also features four input gain settings to make use of the full dynamic range of the ADC.

Dual-phase demodulation

Moku:Lab’s Lock-In Amplifier features a dual-phase demodulator with cascaded single pole low-pass filters to attenuate the second harmonic and suppress noise in each quadrature.

  • Select between 6 dB / octave and 12 dB / octave lowpass filter slopes
  • Select between rectangular (X/Y) and polar (R/Ø) coordinate modes
  • View the demodulated in-phase and quadrature signals prior to the low-pass filters using the integrated Oscilloscope

Internal and External References

Demodulate your input signal with an internal or external reference. In internal mode, the orthogonal reference signals are generated internally using a direct digital synthesizer (DDS). In external mode, you can select between either direct or phase-locked options. In direct external mode, the input signal is demodulated using the reference input signal for single-phase demodulation (X). The phase-locked loop option reconstructs two orthogonal references that are phase-locked to the reference input signal to support external dual-phase demodulation (XY/RØ).

Integrated Oscilloscope

Monitor up to two signals at a time using the Lock-In Amplifier’s integrated 2 channel, 500 MSa/s oscilloscope, and continuously log data at up to 1 MSa/s using its in-built data logger.

PID Controller

Moku:Lab’s Lock-In Amplifier can serve as both a sensor and feedback controller with its built-in PID Controller. The PID controller provides real-time control over proportional, integral and derivative gain profiles with configurable saturation.

Take the guess-work out of configuring
your lock-in amplifier

Stay on top of how your instrument is configured with a high-level view of the lock-in amplifier’s signal processing chain and intuitive block-diagram interface.

Export data effortlessly

Icon-Dropbox.png Icon-SDCard.png Icon-Cloud.png Icon-Email.png

Export your data to Dropbox, SD Card, iCloud or e-mail. Moku:Lab can save an image of your screen or export your data in CSV or .MAT formats.

Flexible inputs

The Lock-In Amplifier’s signal and reference inputs can be configured for AC or DC coupling and 50 Ω or 1 MΩ input impedance. The signal input also features four input gain settings to make use of the full dynamic range of the ADC.

Dual-phase demodulation

Moku:Lab’s Lock-In Amplifier features a dual-phase demodulator with cascaded single pole low-pass filters to attenuate the second harmonic and suppress noise in each quadrature.

  • Select between 6 dB / octave and 12 dB / octave lowpass filter slopes
  • Select between rectangular (X/Y) and polar (R/Ø) coordinate modes
  • View the demodulated in-phase and quadrature signals prior to the low-pass filters using the integrated Oscilloscope

Internal and External References

Demodulate your input signal with an internal or external reference. In internal mode, the orthogonal reference signals are generated internally using a direct digital synthesizer (DDS). In external mode, you can select between either direct or phase-locked options. In direct external mode, the input signal is demodulated using the reference input signal for single-phase demodulation (X). The phase-locked loop option reconstructs two orthogonal references that are phase-locked to the reference input signal to support external dual-phase demodulation (XY/RØ).

Integrated Oscilloscope

Monitor up to two signals at a time using the Lock-In Amplifier’s integrated 2 channel, 500 MSa/s oscilloscope, and continuously log data at up to 1 MSa/s using its in-built data logger.

PID Controller

Moku:Lab’s Lock-In Amplifier can serve as both a sensor and feedback controller with its built-in PID Controller. The PID controller provides real-time control over proportional, integral and derivative gain profiles with configurable saturation.

Take the guess-work out of configuring your lock-in amplifier

Stay on top of how your instrument is configured with a high-level view of the lock-in amplifier’s signal processing chain and intuitive block-diagram interface.

Dual-phase demodulation

Moku:Lab’s Lock-In Amplifier features a dual-phase demodulator with cascaded single pole low-pass filters to attenuate the second harmonic and suppress noise in each quadrature.

Export data effortlessly

Icon-Dropbox.png Icon-SDCard.png Icon-Cloud.png Icon-Email.png

Export your data to Dropbox, SD Card, iCloud or e-mail. Moku:Lab can save an image of your screen or export your data in CSV or .MAT formats.

Moku:Lab’s Lock-in Amplifier is
built on a powerful hardware platform

Moku:Lab is a software-configurable hardware platform for test and measurement that combines the signal processing power of an FPGA with high-speed analog inputs and outputs. Moku:Lab brings a new level of flexibility to the lab, the field, and on the production line.

Control your Moku:Lab hardware through an intuitive iPad interface,
or with our LabVIEW, Python, and MATLAB APIs.

Moku:Lab’s hardware details


  • 2 high-speed inputs (analog)

    • 500 MS/s, 12-bit ADCs
    • 200 MHz bandwidth (-3 dB, 50 Ω)
    • 50 Ω or 1 MΩ impedance
    • AC or DC coupling
    • 1 Vpp / 10 Vpp
    • < 30 nV/√Hz above 100 kHz at 1 Vpp input range


  • 2 high-bandwidth DC coupled outputs (analog)

    • 1 GS/s, 16-bit DACs
    • >300 MHz bandwidth (-3 dB)
    • 50 Ω impedance
    • DC coupled


  • Ultra-stable clocks and external triggering

    • Ultra-stable oscillator with better than 500 ppb accuracy
    • 10 MHz reference input
    • 10 MHz reference output
    • External trigger input


  • Convenient connectivity and storage

    • Connect to your Moku:Lab via Wi-Fi, Ethernet and USB
    • Control your Moku:Lab using iPad, Python, LabVIEW and MATLAB interfaces
    • Save data to Dropbox, email, SD card, or Moku:Lab’s internal RAM
    • Comes with a 16 GB SD card


Learn More About Moku:Lab

Moku:Lab’s Lock-in Amplifier is built on a powerful hardware platform

Moku:Lab is a software-configurable hardware platform for test and measurement that combines the signal processing power of an FPGA with high-speed analog inputs and outputs. Moku:Lab brings a new level of flexibility to the lab, the field, and on the production line.

Control your Moku:Lab hardware through an intuitive iPad interface,or with our LabVIEW, Python, and MATLAB APIs.

Moku:Lab’s hardware details


  • 2 high-speed inputs (analog)

    • 500 MS/s, 12-bit ADCs
    • 200 MHz bandwidth (-3 dB, 50 Ω)
    • 50 Ω or 1 MΩ impedance
    • AC or DC coupling
    • 1 Vpp / 10 Vpp
    • < 30 nV/√Hz above 100 kHz at 1 Vpp input range


  • 2 high-bandwidth DC coupled outputs (analog)

    • 1 GS/s, 16-bit DACs
    • >300 MHz bandwidth (-3 dB)
    • 50 Ω impedance
    • DC coupled


  • Ultra-stable clocks and external triggering

    • Ultra-stable oscillator with better than 500 ppb accuracy
    • 10 MHz reference input
    • 10 MHz reference output
    • External trigger input


  • Convenient connectivity and storage

    • Connect to your Moku:Lab via Wi-Fi, Ethernet and USB
    • Control your Moku:Lab using iPad, Python, LabVIEW and MATLAB interfaces
    • Save data to Dropbox, email, SD card, or Moku:Lab’s internal RAM
    • Comes with a 16 GB SD card


Learn More About Moku:Lab

Moku:Lab is $4,990

Ask Us Anything
Contact Sales Team

Moku:Lab is $4,990

Ask Us Anything
Contact Sales Team