Application Notes

MiM Configuration for MCC computing
Starting with Moku Cloud Compile

For Moku:Go and Moku:Pro

Featuring: Moku Cloud Compile, Moku:Go, Moku:Pro, Multi-instrument Mode

Moku:Go Multi-instrument Mode- Before and After
Moku:Go Multi-instrument Mode

Moku:Go's Multi-instrument Mode for Control Systems

Featuring: Moku:Go, Lab Tutorial, Control Systems, Multi-instrument Mode

The measured high dynamic range frequency response
Using Dynamic Reference Mode in Moku:Pro’s Frequency Response Analyzer

A brief overview on how to use the new In÷In1 measurement mode

Featuring: Frequency Response Analyzer, Moku:Pro

Moku:Lab FRA plots for bandpass filter
S-Parameter Measurement with the Frequency Response Analyzer

RF system analysis focusing on reflected signal minimization to provide greater efficiency and signal strength

Featuring: Moku:Lab, Frequency Response Analyzer, MATLAB

The MIM setup on Moku:Pro for testing the linear dynamic range of different phase detectors
Phase Detection with Lock-in Amplifier and Phasemeter

Principle of Operations Guide

Featuring: Moku:Pro, Phasemeter, Lock-in Amplifier

Photo of Moku:Go set up part 2
Using the Lock-in Amplifier to build an AM radio receiver

Moku:Go for Undergraduate Communications Education

Featuring: Moku:Go, Lock-in Amplifier, Lab Tutorial

Precise Delay Generation with the FIR Filter Builder

Cost-effective approach to generating fractional delays for arbitrary analog inputs

Featuring: Moku:Go, Moku:Lab, FIR Filter Builder

PID controller demo kit
Closed Loop Tuning lab using Moku:Go’s PID Controller

How to tune a PID Controller using a system's closed loop response

Featuring: Moku:Go, PID Controller, Lab Tutorial, Education

Experiment set-up for measurements on LM3476 regulator using Moku:Go
Liquid Instruments and Wurth Elektroniks Power Application Introduction

How Moku:Go can make power electronics education more accessible

Featuring: Moku:Go, Oscilloscope