Moku:Pro Frequency Response Analyzer
Compare all frequency response analyzers
Overview
The Moku:Pro Frequency Response Analyzer enables you to measure the frequency response of a system in both magnitude and phase using a swept sine output from 10 mHz to 500 MHz. Moku:Pro is equipped with four inputs and outputs, enabling differential or ratiometric measurements. Select up to 8192 points per sweep and configure settling and averaging times to balance total sweep duration and signal-to-noise ratio.
Specs
Frequency range
10 mHz to 500 MHz
Averaging time
1 µs to 10 s
Settling time
1 µs to 10 s
Sweep
Linear/Logarithmic
Sweep points
32, 64, 128, 256, 512, 1024, 2048, 4096, 8192
Output voltage range
2 Vpp or 10 Vpp (< 100 MHz)
Input voltage range
400 mVpp, 4 Vpp, or 40 Vpp
Noise floor
< 100 kHz: < -125 dBm
100 kHz to 500 MHz: -135 dBm
Harmonic detection
Up to 15th
Source impedance
50 Ω
Key features
Stimulate the device under test
Linear or logarithmic swept sine output
Configurable math channel
Math channel to add, subtract, multiply, divide, or calculate arbitrary complex-valued equations as response functions are acquired
Rapid phase, amplitude vs. frequency measurements
Use cursors and markers to measure exact values on the plots
Wide range of settling and averaging times
Measurement averaging and settling times are highly configurable
Rapid data sharing
Easily save data and upload to the cloud or Dropbox in common formats
4 outputs and 4 inputs are independently configurable
Probe up to four systems simultaneously, or one system at four points
Live Bode plot updates, or pause for analysis
Monitor the magnitude and phase on the interactive Bode plot
One touch normalization
Save a normalization trace to compare systems or remove spurious cable shifts
Measurement modes
• Absolute (input)
• Relative to output (input/output)
• Relative to first input (input/input 1)
Applications
Impedance measurement
Capacitance/inductance measurement
Stability analysis
Power supply analysis
EMI filter characterization
Electrochemical impedance analysis
Biochemical impedance analysis
Documentation
Specs
Datasheet
User Manual
Intuitive software and API integration
Moku: app for iPadOS provides a clear and dynamic user experience, making configuring, modifying, and debugging your setup easy.
API integration with Python and MATLAB allows straightforward automation of Moku:Pro in complex setups or for repetitive tasks.
Try the software
Auto-normalization
Isolate the magnitude and phase response of the system under test by normalizing out intrinsic delays and magnitude errors introduced by cables and Moku:Pro itself.
Two-port impedance response
Precise two-port system responses, math channel enables easy graphing of a system’s output – over – input.
Available on Moku:Pro hardware
Our most powerful hardware platform to date, Moku:Pro harnesses the power of a Xilinx Ultrascale+ FPGA with higher bandwidth, lower noise, more channels, and more output power than ever before.
Like the Moku:Pro Frequency Response Analyzer?
View pricing Learn about Moku:Pro hardware
Or compare all hardware platforms
