Moku:Pro’s Oscilloscope

Compare all oscilloscopes


Moku:Pro’s 5 GSa/s Oscilloscope features four high-speed, ultra-low noise input channels with 600 MHz analog bandwidth. Innovative blended ADC technology combines the information from 10 bit and 18 bit ADCs to cover a broad spectrum, providing class-leading input noise performance of 30 nV/√Hz at 100 Hz with high dynamic range. The built-in four-channel waveform generators are capable of producing waveforms with a maximum bandwidth of 500 MHz.


Sample rate
• 5 GSa/s on 1 channel
• 1.25 GSa/s on 4 channels

Input bandwidth
600 MHz

Input ranges
400 mVpp, 4 Vpp, or 40 Vpp

Input coupling
AC or DC

Input impedance
50 Ω or 1 MΩ

Input noise
<30 nV/√Hz at 100 Hz

Output bandwidth
• 500 MHz (2 Vpp)
• 100 MHz (10 Vpp)

Vertical resolution
10+18 bits with automatic blending

Key features

Onboard signal analysis
Visualization tools including measurement trends and histograms

Math channel
Add, subtract, multiply, divide, XY mode, FFT, arbitrary equation mode, and many more

Display live, full frame rate histograms, useful for diagnosing sources of error such as electronic crosstalk

Interpolation options
Linear, Sinc, and Gaussian

Cursors abound
Show up to 5 cursors on each channel and on the horizontal axis. Each one can be set as a reference or pinned to the waveform

Onboard Waveform Generators
Built-in four-channel 500 MHz waveform generator

Output waveforms
Sine, square, ramp, pulse, DC


Signal monitoring and analysis

Circuit design and characterization

Jitter/clock analysis

Photo detector alignment

Automated system test

System test and debug


Moku:Pro Spec Sheet

Moku:Pro Datasheet
Moku:Pro’s Oscilloscope Datasheet

User Manual
Moku:Pro’s Oscilloscope User Manual

Connect from your tablet

Control your Moku hardware through an intuitive iPad interface.

Intuitive software and API integration

Moku: app for iPadOS provides a clear and dynamic user experience, making configuring, modifying, and debugging your setup easy.

API integration with Python and MATLAB allows straightforward automation of Moku:Pro in complex setups or for repetitive tasks.

Try the software

Integrated waveform generators

Stimulate a system and measure its response simultaneously with four integrated waveform generators, capable of producing sine waves at up to 500 MHz, and square, ramp, and pulse waves at up to 150 MHz. For signals up to 100 MHz, Moku:Pro can drive 10 Vpp into 50 Ω.

Automatic and manual measurement options

Select from a wide range of pre-set measurements from the measurements pane, which can perform a variety of calculations such as the difference between channels and graph trends. Add cursors to set custom measurements for voltage or time between points.

Available on Moku:Pro hardware

Our most powerful hardware platform to date, Moku:Pro harnesses the power of a Xilinx Ultrascale+ FPGA with higher bandwidth, lower noise, more channels, and more output power than ever before.

Moku:Pro features a suite of nine instruments

Replacing the need for multiple instruments, Moku:Pro is the most powerful solution yet in software-defined instrumentation.